Mother of Pearl vs Sprout: Aura Magnetic Polish Guide

Quick answer

Use Mother of Pearl for a soft ivory aura with white-silver magnetic pigment, and Sprout for a green aura with silver-white magnetic pigment and light green shimmer. Apply either with a magnetic wand while the polish is wet to create a 3D effect.

How to apply Mother of Pearl or Sprout for an aura effect

1. Prep and base coat: Start with clean, dry nails. Apply a base coat and let it dry completely. This prevents staining and helps the polish adhere. Checkpoint: base coat must be fully dry before the magnetic polish.
2. Apply a thin first coat: Apply a thin, even coat of Mother of Pearl or Sprout to all nails. Do not use the magnet yet. Let it dry for about 2 minutes. Mistake to avoid: applying too thick a coat, which can slow drying and blur the magnetic effect.
3. Apply a second thin coat: Apply a second thin coat to one nail at a time. Immediately proceed to the next step while the polish is still wet. Checkpoint: work one nail at a time so the polish stays wet for the magnet.
4. Activate with the magnetic wand: Hold the magnetic wand close to the wet polish without touching it. Hold steady for 5–10 seconds to pull the particles into an aura pattern. Repeat for each nail. Mistake to avoid: moving the magnet during activation, which can distort the design.
5. Seal with top coat: Once the design is set, apply a top coat to protect the effect. Let it dry completely. Checkpoint: use a top coat to lock in the magnetic pattern and add shine.

Product facts

• Mother of Pearl: Mother of Pearl is an ivory pearl nail polish with white-silver magnetic pigment. The ivory base and silver particles create a soft, neutral aura that suits understated looks.

  

• Sprout: Sprout is a leafy green nail polish with super fine silver-white magnetic pigment and a light green shimmer. The green base and shimmer give a fresh, botanical aura that stands out more than a neutral shade.